Ericsson GF768 - Manual (Page 25)

Phone Lock
The phone lock protects the
phone against unauthorized use
of the phone if there is theft. The
phone lock is not activated when you buy the
phone.
These are the two types of phone locks:
Autolock: you need to enter the phone lock
code every time you change SIM
Card in the phone.
Full lock: you need to enter the phone lock
code every time you turn on the
phone.
Changing Phone Lock Code
1. Select Phone Lock in the Locks menu.
2. Select New Code.
3. Enter 0000 at the prompt (the factory default
code) or your own code and press YES .
4. Key in a 4 to 8 digit personal code at the
prompt and press YES .
5. Repeat the new code at the prompt and press
YES .
(Un)Locking Phone
1. Select Phone Lock in the Locks menu.
2. Select the desired lock option, for example
Auto Lock.
3. Enter 0000 (the factory default code) or your
own phone lock code at the prompt and press
YES .
To unlock the phone, choose Unlock in the
Locks menu.
Barring Calls – Restricting Calls
This chapter describes how you can bar (restrict) calls to and from your phone. This feature is
available in your phone, but might not be supported in your subscription.
About Barring Calls
The call barring service lets you control which
kind of calls can be made to or from your
phone. This feature is convenient if you lend
your phone to somebody else. This feature is
GSM service dependent.
Barring Options
Your phone supports the following barring
options (but your subscription might not
support all):
● all outgoing calls – you cannot make any calls.
● all outgoing international calls – you cannot
make any international calls.
● all outgoing international calls except to your
home country – you cannot make any interna-
tional calls except to the SIM Card home
country.
● all incoming calls – you will not receive any
calls.
● all incoming calls when you are abroad – you
will not receive any calls when abroad.
EN
LZT 126 1343/2 R1A 19