Ericsson DT368 - Manual (Page 13)

CORDLESS - DT360
SWITCHING ON/OFF
THE PORTABLE
Switch on the DT360
Press until the display lights up
If the Cordless does not switch on or the battery icon starts
flashing, the battery is low. Charge the battery. While
charging, you can use your Cordless normally.
Note: If the signal strength icon is off and the message
”
NoSystem ” is displayed you cannot make or answer calls.
Switch off the DT360 Note: During calls, you cannot switch off your telephone.
Press until ” P Po ow we er rO Of ff f ” is selected
Press
The display turns blank and your Cordless is switched off.
13
BusinessPhone - Cordless DT310 / DT360 / DT368