Epson PERFECTION V700 PHOTO - Manual (Page 3)

Epson Perfection V700 Photo/V750 Pro
12/05 Epson Perfection V700 Photo/V750 Pro - 3
Scanning a Document or Photo
Before scanning a document, remember to respect the rights of
copyright owners. Do not scan published text or images without
first checking their copyright status.
Caution: Do not place heavy objects on the document table glass
and do not press the glass with too much force.
1. Open the scanner cover.
Make sure the document mat is installed inside the cover. If
it is not installed, see “Replacing the Document Mat” on
page 9 for instructions.
2. Place your document or photo on the document table, face
down on the glass. Make sure the top of the document or
photo is against the upper right corner of the document
table.
3. If you are scanning multiple photos at once, position each
photo at least 0.8 inches (20 mm) apart from the others.
Note: If you are scanning large or thick documents, you can
remove the scanner cover. See “Placing Large or Thick
Documents” below for instructions.
4. Close the scanner cover gently so that your original does not
move.
Note: Always keep the document table clean. Do not leave photos on
the document table for an extended period of time as they may stick
to the glass.
Placing Large or Thick Documents
When you scan a large or thick document, you can remove the
scanner cover.
1. Turn off the scanner using its P power button.
2. Disconnect the cover cable.