Emerson CF2300OB01 - Manual (Page 11)

Using Your Ceiling Fan
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.
2. When controlled by a wall switch check the opera-
tion of the fan by gently pulling on the 4-position
speed control pull chain switch. (This switch has
the longer pull chain.) The operating sequence is
as follows:
THREE-SPEED
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
3.When operated by an Emerson Remote Control,
check operation of fan and light in accordance with
the Remote Control Owner’s Manual.
4. If airflow is desired in opposite direction, turn your
fan off and wait for the blades to stop turning. Then
pull the shorter switch chain and turn fan on again.
The fan blades will turn in the opposite direction
and reverse the airflow.
Attaching Light Kit
To install an Emerson accessory light kit, remove the
two screws securing the switch housing cover to the
switch housing. Remove the screw plug from the bot-
tom of the switch housing cover and install the light kit
in accordance with the Emerson light kit Owner's
Manual.
11
BLACK
BLACK FAN WIRE
LISTED OUTLET BOX
LIGHT
CONTROL
GREEN WIRE
(GROUND)
FROM
HANGER
BRACKET
TO 120
VOLT
SUPPLY
WHITE
GROUND GROUND
GREEN WIRE (GROUND)
FROM HANGER BALL
LISTED WIRE
CONNECTOR (4)
GROUND
WIRE
WHT.
EMERSON
FAN
CONTROL
BLACK
(HOT)
YELLOW
BLUE
RED