Layer 3 switch features – Enterasys Networks VH-8G-L3 User Manual

Page 19

Advertising
background image

9

9033705-01

• 8K active MAC address entry table per device with automatic

learning and aging (10 to 9999 seconds).

• 512 KB packet buffer per device.

• Broadcast and Multicast storm filtering.

• Supports Port Mirroring.

• Supports Port Trunking – up to four trunk groups may be set

up. One trunk group can have from two to eight ports.

• 802.1D Spanning Tree support.

• 802.1Q Tagged VLAN support – up to 63 User-defined

VLANs per device (one VLAN is reserved for internal use).

GVRP – (GARP VLAN Registration Protocol, where GARP
represents a Generic Attribute Registration Protocol (GARP),
support for dynamic VLAN registration.

• 802.1p Priority support with 4 priority queues.

• IGMP Snooping support.

Layer 3 Switch Features

• Wire speed IP forwarding.

• Hardware-based Layer 3 IP switching.

• IP packet forwarding rate of 12 Mpps.

• 2K active IP address entry table per device.

• Supports RIP – (Routing Information Protocol) version I and

II.

• Supports IP version 4.

• IGMP version 1 and 2 support (RFC 1112 and RFC 2236).

IGMP can be globally enabled or disabled for all VLANs.

Advertising