How to maintain, Empty dust cup, Clean filters – Eureka 77 User Manual

Page 7

Advertising
background image

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top efficiency. Empty the dust cup and clean the filter after each
use.

4. Press dust cup onto handle section

until they snap together.

Dust Cup

Latch

7

1. Push down on dust cup latch.
2. Pull dust cup from handle section.

Empty Dust Cup

3. Shake contents into a waste container.

Clean Filters

Clean the filters after each cleaner use.

1. Open dust cup. (See above.)
2. Pull dust cup filter off handle section.
3. Pull motor filter out of filter grid.
4. Shake and brush the dust and dirt

from filters.

5. If desired, launder the filters by hand

in warm water (150°F, 65°C) using a
mild detergent.

6. Air dry thoroughly.
7. Replace filters and dust cup.

Dust Cup
Filter

Motor
Filter

Filter
Grid

Replace dirty or torn filters. Order additional filters from The Eureka Company,
Bloomington, IL 61701.

Motor Filter, part number 61881
Dust Cup Filter, part number 61882

Advertising