Emerilware 20010 - Manual (Page 10)

10
Refitting the central unit:
• Put the lid on your work surface in the position indicated on.
Place the unit back into place. See Fig. 9.
• Check that the open/close knob is in the "Open" position .
• Push the moving parts (flaps) of the lid outwards. See Fig. 9.
• Position the central unit on the lid. Turn over the whole lid
while holding the open/close knob. Then use a coin to tighten
the nut inside the lid.
Remove the seal
• Remove the seal from the lid and clean with a sponge in warm
water and liquid dishwashing detergent.
• To refit the lid seal: turn the lid over so that the interior
surface is visible and fit the seal as shown in the diagrams. See
Fig. 10 and 11.
• Change the seal if it is cracked or nicked, or if the seal is no
longer effective.
Tips to help keep the cooker in perfect condition:
• Avoid overheating the pan while empty.
Brown stains and scratches may appear after prolonged use,
but these will not affect the cooker's performance.
Fig 9
Fig 10
Fig 11
C A R E A N D C L E A N I N G