Control panel, 2 “prewash / rinse hold” button, 3 “quick wash” button – Electrolux EW 880F User Manual

Page 10: 4 “heavy stains” button, 5 “start /pause” button, 6 “spin reduction” button

Advertising
background image

10

Use

EW 88O F

PROGRAMMES

Prewash

Door

Spin

Reduction

650

Start/

Pause

Rinse

Hold

End

500

750

Quick

Wash

in Progress

Heavy

Stains

1

2 3 4 5 6 7

8

Control panel

1 Detergent dispenser Drawer

Programme Option buttons

Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.

2 “Prewash / Rinse Hold” button

Select Prewash option if you wish your laundry to
be prewashed before the main wash (not
available for wool and hand wash
). The relevant
light illuminates.
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.

When selecting Rinse Hold option, the water of
the last rinse is not emptied out, to prevent the
fabrics from creasing. The relevant light illuminates
and will stay on during washing.
At the end of the programme the pilot light End
illuminates and the Rinse Hold light will remain lit.
To drain water, proceed as follows:

turn the programme selector dial to position “O
to switch the machine off;

select programme

(drain) or

(short

spin);

press Start/Pause button.

The light “in Progress” comes on during the drain
or the spin programme. At the end of the
programme the End light illuminates again.

3 “Quick Wash” button

This button allows you to select the Quick Wash
function, for laundry that is only slightly soiled (not
for wool, hand wash and economy programme
60E
).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 3 kg.

4 “Heavy Stains” button

Select this button if you wish to add to the washing of
heavy soiled laundry a stain phase: at the
temperature of 40°C the special detergent for stains
is loaded from the compartment marked

.

This function is available in cotton and synthetic
programmes with a temperature of 40° or higher)
.

The washing time will be prolonged by 5 minutes.
The Prewash and the Heavy Stains functions
cannot be selected together.

5 “Start /Pause” button

After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the “Start/Pause” button again.

6 “Spin reduction” button

By depressing this button you can reduce the max.
spin speed proposed by the machine. The relevant
light illuminates.

132991310.qxd 23/10/2003 15:45 Pagina 10 (Nero/Process Black pellicola)

Advertising