Eton GLOBE TRAVELER G3 - Manual (Page 8)

14
GLOBE TRAVELER G3 OWNER’S MANUAL
15
GLOBE TRAVELER G3 OWNER’S MANUAL
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the
PAGE/TIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. Select the desired memory by pressing buttons F1-7.
Memory pages can be uniquely labeled with 8 intermixed letters, digits
or symbols.
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the PAGE/
TIME button, causing PAGE/MEMO to appear in the display.
2. Press the LIGHT/EDIT button until ‘_’ appears in the display
(about 3 seconds).
3. Use the tuning knob to select the desired letter, digit or symbol.
4. Press the PAGE/TIME button to select the next ‘_’.
5. Repeat until up to 8 letters/digits/numbers are selected.
6. Press PAGE/TIME when finished.
This feature enables copying of one memory or the entire contents of a
page from one location to another.
COPYING AND PASTING ONE MEMORY LOCATION TO ANOTHER
1. With the G3 turned on, press and release the PAGE/TIME button,
causing PAGE to appear in the display.
2. Press to select the page that you wish to copy a memory from.
3. Press the COPY/PASTE button until you see COPY flashing in the
display, then press the F1-7 button that you want to copy from.
4. To paste to the same page, press the F1-7 button that you wish to
paste to; if you wish to change pages, use the buttons to do so
and then press the F1-7 button that you wish to paste to.
5. Press the PAGE/TIME button when finished.
COPYING AND PASTING AN ENTIRE MEMORY PAGE
1. With the G3 turned on, press and release the PAGE/TIME button,
causing PAGE to appear in the display.
2. Press to select the page to be copied.
3. Hold down the COPY/PASTE button until you see COPY flashing in
the display, then do a quick, short press of the COPY/PASTE button
(PASTE flashes in the display).
4. Press selecting the paste-to page.
5. Do a quick, short press of the COPY/PASTE button to paste it.
6. Press the PAGE/TIME button when finished.
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the PAGE/
TIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. Press the ERASE button for about 2 seconds or until DEL starts
flashing in the display.
4. Press the F1-7 button that you wish to erase. Note that the box
surrounding the memory location disappears.
5. To select another memory page press the buttons and repeat
the process.
6. Press PAGE/TIME to exit PAGE/MEMO mode.
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the
PAGTIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the buttons.
3. Press the ERASE button for about 2 seconds or until DEL starts
flashing in the display.
4. Press the ERASE button for about 2 seconds – all boxes around F1-7
will disappear.
5. Press PAGE/TIME to exit PAGE/MEMO mode.
LABELING MEMORY PAGES
USING THE COPY/PASTE FUNCTION
USING THE COPY/PASTE FUNCTION continued
DELETING A SELECTED MEMORY
DELETING ALL OF A MEMORY PAGE’S CONTENTS
ACCESSING STORED MEMORIES