Emerson Radio ES2 - Manual (Page 10)

9
Preparation For Use
Place the unit on a strong, level surface such as a cabinet or shelf. Make sure the unit
is within easy reach of an AC outlet.
To ensure adequate ventilation for the unit, do not operate it while it is placed on a
soft surface (such as a carpet). Make sure that the ventilation slots in the cabinet are
not obstructed. Keep items such as newspapers, tablecloths, curtains, etc away from
the unit.
Do not subject the unit to excessively hot, cold, damp or dusty conditions. Do not
operate the unit near a radiator or heater.
The unit must not be exposed to dripping or splashing. Never place objects filled with
liquids (such as vases) on the unit. If liquid is accidentally spilt or splashed on the
unit, disconnect the AC plug from the wall outlet immediately and consult your dealer.
No naked flame sources (such as lighted candles) should be placed on or near the
unit.
Note:
Leave at least 3 inches (7cm) to the rear of the unit for proper ventilation.
Finally, position the speakers to the left and right of the unit.
Connections
Connect the speakers to the red and black terminals on the back of the unit as shown
below. To open the terminals, slide the plastic flaps away from the terminals, then
insert the wires into the terminals. Return the plastic flaps to their original position to
lock the wires in place.
ES2_ib041503.p65 15/4/2003, 9:36 9