Elation Professional 72MKII - Manual (Page 21)

DESIGN LED 72MKII™
©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com
NEW VALUE: 0-255
PRESET VALUE: XXX
STROBE
NEW VALUE: 0-255
PRESET VALUE: XXX
SPEED
NEW VALUE: 0-256
PRESET VALUE: XXX
FADE
NEW VALUE: 0-256
PRESET VALUE: XXX
CHASE 7
STROBE
NEW VALUE: 0-256
PRESET VALUE: XXX
SPEED
NEW VALUE: 0-256
PRESET VALUE: XXX
FADE
NEW VALUE: 0-256
PRESET VALUE: XXX
CHASE 8
STROBE
NEW VALUE: 0-256
PROGRAM SCENE BY
EDIT SCENE # XX EDIT CHANNEL # XX
SET CHANNEL
VALUE
ON-BOARD CONTROLS XXX
DOWNLOAD SCENE SELECT SCENE # XX
<EDIT SCENES>
FROM CONTROLLER SAVE (ENTER)
START SCENE LOOP SCENE LOOP PLAYS FROM FIRST TO LAST
(ENTER) SCENES
SET START SCENE
PREVIOUS SCENE #
XXX
SET FIRST SCENE FOR SCENE LOOP
NEW SCENE # XXX
SET END SCENE
PREVIOUS SCENE #
XXX
SET LAST SCENE FOR SCENE LOOP
NEW SCENE # XXX
SPEED
PRESET VALUE: XXX
SET SCENE LOOP SPEED
NEW VALUE: 0-255
FADE
PRESET VALUE: XXX
SET SCENE LOOP FADE
E
D
IT
/P
L
A
Y
<PLAY SCENES>
NEW VALUE: 0-255
<DIMMER MODE>
MODE 1 (ENTER) STANDARD DIMMING OPTION
MODE 2 (ENTER) LINEAR DIMMING OPTION
<FACTORY RESET>
YES (ENTER) RESTORE FACTORY DEFAULT SETTINGS
O
T
H
E
R
F
U
N
C
T
IO
N
S
<SOFTWARE VERSION>
V X.X DISPLAY'S CURRENT SOFTWARE VERSION
NOTICE:
1) If the fixture does not receive a DMX signal the menu display will flash repeatedly.
2) The “SPED” and “FADE” function only work when the fixture is operating via one of the
internal chase programs.
3) SPED: Adjust the hold time for each scene in built-in chase programs.
4) FADE: Adjust the fade time between each scene in the built-in programs.
5) This fixture will automatically retain the last DMX command in the event of DMX failure.