Edimax Technology EU-4207 - Manual (Page 11)

8
7. Click on Restart to take the new settings effect.
Now the installation is complete. You can connect the adapter to a
network device by an Ethernet cable:
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub,
switch or router.
The Link LED should light up green to indicate a proper physical
connection between the adapter and the network. If the Link LED
doesn’t light up, please verify the cable connections between all the
network devices.
* Actual strings depend on your operation system. These screen shots
are from Mac OS X v10.4 and might vary slightly for each operation
system.