Symbols, Key t o symbols – Husqvarna 327P5X User Manual
Page 2
KEY
T
O SYMBOLS
2
–
English
Symbols
W
ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others. It is extremely important that
you read and understand the
contents of the operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
•
A protective helmet where there
is a risk of falling objects
•
Approved hearing protection
•
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
This machine is not electrically
insulated. If the machine
touches or comes close to high-
voltage power lines it could lead
to death or serious bodily injury.
Electricity can jump from one
point to another by arcing. The
higher the voltage, the greater
the distance electricity can
jump. Electricity can also travel
through branches and other
objects, especially if they are
wet. Always keep a distance of at least 10 m between the
machine and high-voltage power lines and/or any objects
that are touching them. If have to work within this safe
distance you should always contact the relevant power
company to make sure the power is switched off before
you start work.
This machine has a long reach. Make sure that no people
or animals come closer than 15 m when the machine is
running.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the
machine refer to special certification requirements
for certain markets.
The engine is s
witched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Filling with chain oil and adjusting oil
flow