Harbor Freight Tools Angle Drill With Keyless Chuck 92188 - Manual

Item 92188
Angle Drill
With Keyless Chuck
Operating Instructions
3491 Mission Oaks Blvd., Camarillo, CA 93011
'LVWULEXWHGH[FOXVLYHO\E\
+DUERU)UHLJKW7RROV Š 
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
Read all instructions before using this product!
Do not exceed 6,000 RPm maximum speed. 1.
Avoid working alone 2. . If an accident happens, an assistant can bring help.
Keep work area clean 3. . Cluttered areas invite injuries.
Keep children away 4. . Children must never be allowed in the work area. Do not let them handle ma-
chines, tools, or extension cords.
Copyright © 2004 by Harbor Freight Tools ® . All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product! For future reference, please com-
plete the owner’s record below:
model:___________________ Purchase Date:__________________
Save the receipt, and these instructions. It is important that you read the entire instruction
sheet to become familiar with this product before you begin using it.
Technical Specifications:
Angle Drill includes 3/8” Shaft Attachment
Hex Shaft Size: 5/16”
Spindle Thread: 3/8” - 24
Maximum Speed: 6000 RPM
ReV 09b