Hamilton Beach 6200 - Manual (Page 5)

5
GETTING FAMILIAR WITH YOUR HAMILTON BEACH
WATER DISPENSER
Features:
• Designed for in home or office use.
• Front panel has three indicator lights, power indicator light will remain on at all times
while hot and cold indicator lights may alternate on and off since the heater and cooler
may not draw power continuously.
• Two power switches are located on the back of the dispenser. One is for cooling and one
for heating.
• Designed with distinctive thermal isolation technology, this dispenser can minimize
thermal exchange between hot and cold water.
• Both hot water tank and cooling tank are 304 stainless steel.
• Convenient, built-in, 0.50 cubic foot storage compartment for non-perishable items.
• Chilling compressor is quiet and durable.
• There are two high-flow faucets on the front of the unit. The faucet with the red child-
safety button is for hot water and blue is for cold water.
• Hot water faucet has a child resistant hot water guard. To operate it, push the red tab to
the left to disengage the locking device, and then push the push button inward.
• Removable, easy-to-clean drip tray.
• The power cord has a grounded plug. Please make sure that your outlet is properly
grounded.
• Fits 3 or 5 gallon bottles
WARNING: BURN HAZARD. The dispenser heats water to a temperature of
approximately 190 ° F (88 ° C). Water temperatures above 125 ° F (52 °C) can
cause severe burns or death from scalding. Children, the disabled and the elderly
are at highest risk of being scalded. Children should be supervised by an adult
when using this product.