HONDA EU2000i - Manual (Page 36)

34
OPERATION
DC OPERATION
Connecting the battery charging cable (optional equipment):
WARNING:
Wash hands after handling.
When using the DC output, turn the Eco-Throttle switch to the OFF
position.
Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle battery ground cable
from the negative (
) battery terminal.
Battery posts, terminals, and related accessories contain
lead and lead components.
Plug the battery charging cable into the DC receptacle of the
generator.
The battery gives off explosive
hydrogen gas during normal
operation.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled mechanic
perform the battery maintenance.
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
1.
2.
09/02/11 11:51:37 31Z07620_035