Hamilton Beach 840097100 - Manual (Page 3)

To Disassemble: Unplug cord from
outlet. Unlock both safety latches by
pulling out bottom of latch. Remove
cover, then lift up separator with
cutter/strainer.
1. Food Pusher
2. Food Chute
3. Cover
4. Cutter/Strainer
5. Pulp Bowl
6. Separator
7. Juice Spout
8. Safety Latches
9. Power Switch
10. Motor Base
3
Know Your Juice Extractor
Before First Use: After unpacking
the juice extractor, wash everything
except the base in warm, soapy
water. Rinse and dry immediately.
Never immerse the base in water;
wipe it with a damp sponge.
Important Information
• The juice extractor is manufactured for
NORMAL HOUSEHOLD USE. If you
have large quantities, such as 10
pounds or more, process in small
batches, allowing motor to cool
completely between uses.
• When juicing CARROTS, DO NOT PACK
food chute. Place carrots in food chute
one by one, and use gentle pressure.
• DO NOT OVERLOAD THE FOOD
CHUTE. For best results, simply drop
food pieces, one at a time, into chute.
Gently and slowly press with food
pusher. This will extract the maximum
amount of juice.
• If the juice extractor SEEMS TO
STRUGGLE or slow down, turn the
unit OFF and unplug. Thoroughly
wash the cutter/strainer and separator
according to instructions. Reassemble
and continue juicing.
w WARNING
To reduce risk of personal injury and/or damage to your juice extractor:
• Never wash cutter/strainer or other removable parts in a dishwasher.
• Always inspect cutter/strainer before each use.
• Do not use a cracked, bent or damaged cutter/strainer.
IMPORTANT INFORMATION: The cutter/strainer is a very delicate screen
subject to wear, and therefore is not covered under warranty. Call our toll-free
customer service number to order a new cutter/strainer.