Hand Held Products 2020 - Manual (Page 121)

2020/3820 User’s Guide 6 - 31
Symbology Identifier will be reported as “]C1”. If GS1 DataBar Emulation is
selected, the AIM Symbology Identifier will be reported as “]e0.” Any application
that accepts EAN•UCC data can be simplified since it only needs to recognize
one data carrier type.
Default = EAN•UCC Emulation Off .
China Post Code
<Default All China Post Code Settings>
China Post Code
China Post Message Length
Scan the barcodes below to change the message length. Refer to Message
Length on page 6-2 for additional information. Minimum and Maximum
lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
GS1 DataBar Emulation
128 Emulation
* EAN•UCC Emulation Off
On
* Off
Minimum Message Length
Maximum Message Length