Hitachi WIRELESSIP TD61-2472A - Manual (Page 55)

User's Manual
2
You can switch the ringtone/ mode/ LED for inside lines and outside lines.
To set the ringer for a call coming in on an outside line, either press the "1"
on the number pad or select "1. External 1", then press the
key.
To set the ringer for a call coming in on an inside line, either press the "3"
on the number pad or select "3. Internal 1", then press the
key.
There are four settings available, two each for inside and outside lines.
Example
Setting Ringer Mode LED
External 1 Bell 1 Bell Blue
External 2 Bell 5 Vibration Red
Internal 1 Bell 11 Bell + vibration No
alert
Internal 2 Bell 13 Mute Blue
* Depending on the device connected, this is not possible. In this case, only
"1. External 1" is enabled.
3
Displays configuration information. (Ringtone, Mode, LED)
There are four modes.
・ Bell (bell)
・ Vibration (vibration)
・ Bell + vibration (bell + vibration)
・ Silent (mute)
There are three LED colors.
・ RED
・ BLUE
・ (None)
H i t a c h i C a b l e 5 2 / 8 4