Hearth and Home Technologies BAY-40 - Manual (Page 35)

35 Heat & Glo • BAY-40, PIER-40 • 34977 • Rev W • 11/08
• TCT1175 Terra Cotta Cap
Chimney
Pipe
Chase Top
Termination Cap
Chase
Collar
2 in. (51 mm)
Minimum Height
Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm)
Place waterproof
sealer under each
flange of the termina-
tion cap and on top of
each screw to help
prevent leaks.
The last section of pipe
must stop between 2 in.
(51 mm) above top of
chase and 7 in. (178
mm) below top of chase
2 in. (51 mm)
7 in. (178 mm
Figure 9.7 Installing a TCT1175 Terra Cotta Cap