HP Color Copier - Manual (Page 24)

3-4 All About Paper
Other Paper Tray Considerations
To avoid paper jams, remove papers from the OUT tray frequently. OUT tray
capacity is affected by the type of paper and the amount of ink you are using.
For more information, see Chapter 8, “Technical Information.”
Automatic Document Feeder (ADF) Requirements
◆ Load a maximum of 30 originals at a time when using letter (A)- or
A4-sized papers.
◆ Load only plain paper (white and color), letterhead, and HP Premium
Inkjet Paper in the 16–24 lb (60–90 gsm) range.
◆ Always insert originals with the printed-side facing back in the feeder
and the top of the paper to the right. Align the paper with the right side
of the ADF.
◆ Do not start copying until the “Document loaded” message appears
briefly on the front panel display and you see the Copy Quality lights
flash.
◆ Do not load colored originals printed on a color laser printer.
NOTE Load only letter (A)- or A4-sized papers in the ADF. Load only plain paper or HP
special papers such as HP Premium Inkjet Paper.
Slick-surfaced papers, such as glossy papers, will also jam in the ADF. A full-page
color graphic printed on a color laser printer develops a slick surface.