HP 4100GL - Manual (Page 60)

RADIUS Authentication and Accounting
Configuring the Switch for RADIUS Authentication
Configuring the Switch for RADIUS
Authentication
RADIUS Authentication Commands Page
aaa authentication 3-8
< console | telnet | ssh > < enable | login > radius 3-8
< local | none > 3-8
[no] radius-server host < IP-address > 3-10
[auth-port < port-number >] 3-10
[acct-port < port-number >] 3-10, 3-19
[key < server-specific key-string >] 3-10
[no] radius-server key < global key-string > 3-12
radius-server timeout < 1 .. 15> 3-12
radius-server retransmit < 1 .. 5 > 3-12
[no] radius-server dead-time < 1 .. 1440 > 3-13
show radius 3-23
[< host < ip-address>] 3-23
show authentication 3-25
show radius authentication 3-25
Outline of the Steps for Configuring RADIUS
Authentication
There are three main steps to configuring RADIUS authentication:
1. Configure RADIUS authentication for controlling access through one or
more of the following
• Serial port
• Telnet
• SSH
• Port-Access (802.1x)
2. Configure the switch for accessing one or more RADIUS servers (one
primary server and up to two backup servers):
3-6