Symbols on the machine, Symbols in the operator’s manual, Key t o symbols – Husqvarna Rancher 55 User Manual

Page 2: Symbols on the mac hine, Symbols in the operator’ s manual

Advertising
background image

2

English

KEY

T

O SYMBOLS

Symbols on the mac

hine:

W

ARNING! Chain saws can be dangerous!

Careless or incorrect use can result in
serious or fatal injury to the operator or
others.

Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.

Always wear:

Approved protective helmet

Approved hearing protection

Protective goggles or a visor

This product is in accordance with applicable
EC directives.

Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.

Other symbols/decals on the mac

hine refer to special

certification requirements for certain markets.

Symbols in the operator’

s manual:

Switch off the engine b

y moving the stop

switch to the STOP position before carrying
out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Refuelling.

Filling with oil and adjusting oil flow.

The chain brake must be engaged when the
chain saw is started.

WARNING! Kickback may occur when the
nose or tip of the guide bar touches an object,
and cause a lightning fast reverse reaction,
kicking the guide bar up and towards the
operator. May cause serious personal injury.

Advertising