HP iPAQ hx4700 - Manual (Page 21)

Getting to Know Your iPAQ Pocket PC
User’s Guide 1–12
Routine Care
Ä CAUTION: The screen of your iPAQ Pocket PC is made of glass and
can be damaged or broken by drops, impacts, or pressure.
Note: HP is not responsible for damage that occurs as a result of
your failure to follow the instructions that came with the HP
branded product. Refer to the warranty document included with
your iPAQ Pocket PC for more information.
You should observe the following practices to protect the screen
of your iPAQ Pocket PC from damage:
■ Do not sit on your iPAQ Pocket PC.
■ When transporting your iPAQ Pocket PC in a purse, pocket,
briefcase, etc., ensure the device does not get compressed,
bent, dropped, or hit.
■ When not in use, close the flip cover on your iPAQ Pocket PC
and store it in a case. You can select from a wide variety of
case options at
www.hp.com/go/ipaqaccessories or
www.casesonline.com .
■ Do not place anything on top of your Pocket PC.
■ Do not bang your iPAQ Pocket PC against hard objects.
■ Never use any device other than the stylus that comes with
the Pocket PC or an approved replacement to tap or write on
the screen. If you lose or break your stylus, you can order
extras at
www.hp.com/go/ipaqaccessories .
■ Clean your Pocket PC by wiping the screen and the exterior
with a soft, damp cloth lightly moistened only with water.
Ä CAUTION: To reduce the risk of damage to the internal components,
do not spray liquid directly on the screen or allow excess liquid to drip
inside your iPAQ Pocket PC. Using soap or other cleaning products on
the screen may discolor the finish and damage it.