Husqvarna AR19 - Manual (Page 22)

20 – English
RUNNING
Starting the engine
Check that all daily maintenance as described in the
maintenance schedule has been performed. Check
that there is sufficient fuel in the tank.
Fuel valve
Open the fuel valve. Turn the lever all the way to the
right.
Choke control
When starting the engine warm, the lever should be
in the right position; see the illustration.
When starting the engine cold or partially warm, turn
the lever completely or partly to the left.
Move the lever back to the right once the engine
starts. When the engine is cold, it may be best to
move the lever back in several stages. Find the
position where the engine runs smoothly.
Engine switch
Turn the engine switch clockwise to ON.
Starter handle
Misuse of the starter handle can damage the starter.
Never twist the starter cord around your hand. Pull
out the handle slowly until the gears mesh. Then
give a sharp pull on the starter handle. Do not pull
out the starter cord completely and do not let go of
the starter handle when extended.
OFF OFF
ON ON
8011-072
8011-035
8011-071
8011-044