Preparation of the remote control unit, Battery installation, Installation aerial connection – haier 29F3A User Manual

Page 5

Advertising
background image

Battery installation

Take off the battery compartment cover. Place two AA batteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.

Installation

Aerial connection

For an optimum high quality picture, it is strongly advised that the TV set connect to an
external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite
(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be
transferred. For optimum picture performance with satellite decodes' use a RGB ready
SCART cable and set the decoder to an RGB output.

Preparation of the remote control unit

Operation notes for the remote control unit

Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.

Avoid dropping the remote control and/or getting it wet.

Never place batteries in a fire.

300 twin-lead cable

Antenna adapter
(additional purchase)

75 coaxial cable

Advertising