Hyun Won DAH-1100 - Manual (Page 13)

13. Upgrade the firmware
Caution: You had better not use the upgrade because it can
damage to the machine.The customer who want a firmware
upgrade can upgrade by downloading a latest version in our
homepage(http://www.m-any.com) Before the upgrade of firmware,
you had better backup the important file.
To upgrade a firmware, you should wait for about 10 seconds with pushing
a play/stop button and connecting before connecting an USB drive to the
computer.
Start->program->USB Combo->Firmware Upgrade
Push the start button. After finishing the memory Firmware Upgrade,
you can complete with the close button.
Note: In the case of the progress bar's not being proceeded in the above
figure, it shows that the USB drive is not connected normally. In this case,
push the play/stop button after disconnecting an USB drive with PC and
reconnection the USB drive to the PC.
The present
firmware version
The firmware
version to be
upgraded
Select Quick/
Low download
20 12. Format
Caution: In the case of a format, the user of window
98/98SE/ME/XP/2000 should install a software provided by the
company. In the case of using a existing format of computer such a
FAT32, NTFS, it is possible that this machine does not operate
normally. Before the format, you had better backup.The separation
USB drive from computer on the format process may result to a
product trouble.
To upgrade a firmware, you should wait for about 10 seconds with
pushing a play/stop button and connecting before connecting an USB
drive to the computer.
Note: If the start button is not activated after executing an upgrade
software, it shows that the USB drive is not connected normally.(In
this case, you should reconnect the USB drive)
Start->program->USB Combo->Format
Push the start button. After finishing the memory format, you can
complete with the close button.
Note: After completing the format, you should reconnect the USB
drive to PC to use normally.
He present memory location
Format type Indication of total memory
19