HONDA GX340 - Manual (Page 29)

29
TRANSPORTING/STORAGE
When transporting the engine, turn the fuel valve OFF and keep
the engine level to prevent fuel spillage. Fuel vapor or spilled fuel
may ignite.
Gasoline is extremely flammable and is explosive under certain
conditions. Do not smoke or allow flames or sparks in the area.
SEDIMENT CUP
DRAIN SCREW
Align the mark on the
starter pulley with the hole
at the top of recoil starter.
Before storing the unit for an extended period;
Be sure the storage area is free of excessive humidity and dust.
Drain the fuel...
Electric starter type: Remove the battery and store it in a cool,
dry place. Recharge it once a month.
Cover the engine to keep out dust.
With the fuel valve in the OFF position, remove and empty the
sediment cup.
Turn the fuel valve to the ON position and drain the gasoline
from the fuel tank into a suitable container.
Replace the sediment cup and tighten securely.
Drain the carburetor by loosening the drain screw. Drain the
gasoline into a suitable container.
Change the engine oil (page 19 ).
Remove the spark plug and pour about a
tablespoon of clean engine oil into the cyl-
inder.
Crank the engine several revolutions to dis-
tribute the oil, then reinstall the spark plug.
Pull the starter rope slowly until resistance
is felt. Continue pulling until the notch on
the starter pulley aligns with the hole on
the recoil stater (see illustration below). At
this point, the intake and exhaust valves
are closed, and this will help to protect the
engine from internal corrosion.
1.
2.
6.
7.
a.
b.
c.
d.
3.
4.
5.