Honeywell DH-835 - Manual (Page 5)

• Place the Motor Housing back into the base.
• Position the Water Tank in the humidifier and push into place. Some water will empty
into the base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If it
has to be moved, unplug the humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE HUMIDIFIER.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJUR Y.
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL
SHOCK COULD OCCUR.
• With the power switch in the OFF position, plug the filled humidifier into a polarized
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
H U M I D I T Y C O N T R O L
1. Set the fan speed to the desired position (Fig. 4).
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For quieter nighttime operation
2. Set the Moisture Control knob (Humidistat) on HIGH,
by turning the dial counter-clockwise to the
largest black dot before “+” sign (Fig. 4).
NOTE: If the humidifier fan will not start or restart when
you select a fan speed, the Moisture Control may be
set too low. Turn the dial counter-clockwise to
the largest black dot before the “+” sign. The Desired
Humidity light will be Off when the unit is producing
moisture (Fig. 4).
Turn the humidifier OFF if the humidity level feels too moist or you notice
condensation forming on the walls and/or windows.
Fig. 4
(HIGH) (LOW)
FILLING (cont.)
OPERATION