HP 4100TN - Manual (Page 60)

58 Chapter 2 - Printing tasks EN
Inserting and removing the
envelope feeder
1 Open tray 1.
2 Remove the plastic cover from the
printer. (Replace the cover when the
envelope feeder is not attached.)
3 Insert the envelope feeder into the
printer until it locks into place. (The
connector on the top right side of the
envelope feeder fits into the plug in
the printer.) Pull gently on the
envelope feeder to be sure that it is
securely in place.
4 To remove the envelope feeder,
press the release button on the left
side and pull the envelope feeder
away from the printer.
1
2
3
4