Specifications, Unpacking, Operating instructions – Harbor Freight Tools DRILL MASTER 67031 User Manual

Page 6

Advertising
background image

Page 6

For technical questions, please call 1-800-444-3353.

SKU 67031

SPeciFicationS

Electrical Input

120 V~ / 60 Hz

Electrical Output 22 VDC / 500 mA

Charge Time

3-5 hours

Charging

Capability

67029 - 18 V, 1.3 A, NiCd

Battery Pack (sold separately)

unPacking

When unpacking, make sure that

the item is intact and undamaged. If any

parts are missing or broken, please call

Harbor Freight Tools at 1-800-444-3353 as

soon as possible.

oPerating inStructionS

read the entire imPortant

SaFety inFormation

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

Place the Battery Pack on a dry

1.

fireproof surface in a room where the

temperature is from 50–104° F.
Allow the Battery Pack to cool

2.

completely before charging.

make sure the battery pack is

undamaged; do not charge a

cracked or leaking battery pack.
Disconnect the Cord from the

3.

Charger. Attach the plug to a

grounded, 120 V~, 60 Hz outlet.

charger

Battery

Pack

Figure 4a

Power

indicator

alignment

tab

Figure 4B

4. Slide the Charger onto the Battery

Pack until it firmly rests in place

against the alignment tab (see

Figures 4A and 4B). If the Charger

does not fit properly, disconnect it

and confirm that the Battery Pack is

the correct model for this Charger as

shown on the Specification chart.

do not charge any Battery Pack not

listed or any Battery Pack that the

Charger does not securely fit.
Attach the Cord to the Charger. The

5.

Power Indicator will light to show that

the power is connected.
For a fully discharged battery or a

6.

new battery, allow the Battery Pack to

Charge for at least 3 hours.

do not charge the Battery Pack

longer than 5 hours.

WARNING!

time the charging cycle.

the battery charger will not signal

when charging is finished.
Unplug the Charger and disconnect it

7.

from the Battery Pack when finished.
Allow the Battery Pack to cool

8.

completely before using it.
Store the Charger and Battery Pack

9.

indoors, out of reach of children.

reV 09h

Advertising