Hamilton Beach Open Ease Can Opener 840064900 - Manual (Page 3)

5
How to Use Your Can Opener
1. Place can opener on level surface.
2. Plug cord into electrical outlet.
3. Raise piercing lever up.
4. Place rim of can firmly under can
guide and against geared wheel.
5. Tilt top of can in, to position the
cutting blade inside the rim of
the can.
6. Press piercing lever all the way
down.
7. The motor will begin turning can
and cutting lid. (It is not necessary
to hold the piercing lever down or
to hold the can during the cutting
action.)
8. The motor will automatically stop
when the can is open.
9. Remove can from can opener and
check can contents to remove any
pieces of label or metal shavings.
4
Know Your Can Opener
1. Can Guide
2. Piercing Lever
3. Geared Wheel
NOTE: To assemble
the piercing lever onto
the can opener, see
Step 5 in the “How to
Clean” section.
(Use the flip-up magnet to
easily see can position.)