HP SAP Smart Forms and Zeberea Print - Manual (Page 15)

Driving Zebra Printers from Smart Forms
13760L Page 14
Test Printing from Smart Forms to an Output
Device / Print Queue
Please ensure that the form you test print with has been designed for your device.
Do not try and print a form that has been designed with “HELVE” on an ANDALE
Unicode Device type (zlzebuX).
Please follow the following procedure to do a test print directly from Smart Forms:
Open the form you wish to print (/nSmart Forms), Type in the Form Name and press
“Change.” You will now see a screen similar to that below:
© SAP AG 2004. All rights reserved.
Press the Test Icon (or press F8). You will now see a screen similar to that below: