HP 815MFP User Manual
Page 90
84
hp designjet 815mfp & scanner 4200
glue mark arrows
After cutting the edges at the cut line, bring your panels together by
overlapping with the rightmost panel on top of the panel on its left.
The second panel in a row overlaps the first panel, the third
overlaps the second and so on. Use the glue mark arrows to fit and
glue the panels together with perfect seams (see the illustration
below).
You assemble the panels by bringing the arrows printed on the
overlapping panel down on top of the arrows printed on the
underlying panel.
If the Tiling option is selected, cut lines and glue marks (D) will be
printed, both for horizontal connection (as illustrated above) and for
vertical connection.
Bring your panels together by overlapping the edges with each
rightmost panel (B) on top of the panel on its left (A). The second
panel in a row overlaps the first panel; the third overlaps the second
and so on as illustrated below. Vertical connection (tiling only) is
performed with the first row at the lowest level and then each
following row overlaps the bottom edges of the tiles in the row
before it.