How do i set up the system, How do i connect to a network, How do i configure tcp/ip settings – HP 815MFP User Manual
Page 41: To check your tcp/ip settings
hp designjet 815mfp & scanner 4200
35
how do I set up the system?
how do I connect to a network?
1. Connect the RJ45 network cable to the Ethernet port at the
back of your touch screen.
2. Check your TCP/IP settings.
3. Create a workgroup on the network.
4. Share the Images folder in your touch screen so that it can be
accessed by other computers on the network.
You will probably want to connect your printer to the same network.
See your printer’s documentation for further information.
how do I configure TCP/IP settings?
You may need to change your TCP/IP settings in order to connect
successfully to a network.
to check your TCP/IP settings…
1. Press the Quit button
and select Exit to exit your
scanner system software.
2. Press the System Setup button.
3. Press the Network Connection button. The Network and Dial-
up Connections window will appear.