HP 815MFP - Manual (Page 45)

hp designjet 815mfp & scanner 4200 39
to set the scanner system power up/down timer…
1. Press the Quit button and select Exit to exit your
scanner system software.
2. Press the System Setup button.
3. Press the WIDEsystem button.
4. Select the Timer tab.
5. To activate the automatic power on, in the On column select
the check box for the day.
6. To modify the time, select the hours digits and press the up or
down buttons and then select the minutes digits and repeat the
process.
7. Select AM or PM, and press the up or down buttons.
8. To activate the automatic power off, in the Off column select
the check box for the day and then set the off time as
described in steps 6 and 7 above.
9. Press the Apply button to confirm your changes and continue
or press the OK button to confirm changes and exit
WIDEsystem.
See tell me about WIDEsystem on page 71.
how do I define scanner setup options?
to access the scanner setup options…
1. Press the Setup tab.