HP 815MFP - Manual (Page 47)

hp designjet 815mfp & scanner 4200 41
Positive settings mean that the distance between scan lines will be
increased, and negative settings mean that the distance between
scan lines will be decreased.
When you exit the Scanner Setup dialog, the modified value is
stored in non-volatile memory in the scanner and can only be
changed by re-doing the setup.
See correction factor in scanning on page 81.
extended thickness settings
Normally, only stiff media will affect stitching. A flexible media will
usually be stitched correctly regardless of its thickness.
1. If the lines seem uneven, check the box labeled Adjust for
extended media thickness.
2. Change the value for each of the scanner’s cameras.
Normally, only positive values should be used.
3. Make test scans and readjust the values until you are satisfied
that the lines are stitched correctly.
4. Click OK to accept your settings.
See extended thickness paper handling on page 80.
how do I create/delete/disable an account?
The Accounting feature helps keep track of your copy activities.
Only one account (besides the Total account) can be active at a
time.
to create a new account…
1. Press the Setup tab.
2. Press the Account button. If Setup tab > Options > Quick select
lists is selected, then press the Tool button.