Tell me about my scanner, Tell me about my scanner operator panel and lights, Scanner control area – HP 815MFP User Manual
Page 61
hp designjet 815mfp & scanner 4200
55
tell me about my scanner
tell me about my scanner operator panel and lights
The scanner’s operator panel shown above is divided into two main
areas:
• scanner control area with 1 key and 3 red/green indicator
lights.
• paper control area with 2 keys and 1 red/green indicator
light.
scanner control area
power button and indicator light
When you connect the scanner to the power outlet it starts
up in ON mode: the light is green. With the scanner then
connected to the power outlet, you control scanner power through
the power switch:
• To turn the scanner from ON to OFF, press down for 1 second
until the light is red.
• To turn the scanner from OFF to ON, press down until the light
is green.
diagnostics light
Flashes if an error is detected by the built-in diagnostic.
Simultaneous flashing by both the Diagnostic and the Wait (Warm-
up) lights may mean that that the scanning area needs cleaning. For
cleaning instructions see maintenance procedures on page 24.
Restart the scanner after cleaning.