HP 815MFP - Manual (Page 79)

hp designjet 815mfp & scanner 4200 73
tell me about copy and layout features and options
tell me about the copy size
overview
The Input size, Output size, and Scale settings work together to
determine the image capture area and the size of the resulting
copy. The three are connected and changing one will automatically
adjust the others following a defined order. You can select your size
values from a list containing standard and custom predefined sizes.
For the Input Size you can also choose to let the scanner detect the
size automatically which is useful when you don’t know the size
offhand. Your scanner software always maintains an image’s aspect
ratio when input and output sizes differ.
Usually you would set the Input Size to that of the original, but you
can also use small sizes to copy selected portions. With the Output
size setting or Scale, you can blow up, shrink, or make one-to-one
copies of the original.
size options—relationships
The Input, Output, and Scale values are connected and changes to
each automatically adjust the others.
The first time you set a size value, or just after you press reset:
• changing the Input size adjusts the Output size
• changing the Output size adjusts the Scale
• changing the Scale adjusts the Output size
You can use Auto width and length for the input size and a specified
size for output. In such cases the Scale setting will be set to Auto
until a first preview has detected the original’s input size and
thereby calculated the correct scale.
Note: your scanner software will always retain an image’s aspect
ratio when the input size and output size differ.
Size values will also change when you adjust the paper frame
through the Resize Paper Frame tool.