HP 815MFP - Manual (Page 8)

2 hp designjet 815mfp & scanner 4200
how do I make copies?
quick copying
If you are copying a freshly printed plot, make sure that it has dried
completely before placing the document in the scanner insertion
slot. If it is not dry, you could damage your plot and dirty the glass
plate on your scanner.
Remember to set your printer media width in your copy system
software. See how do I set the printer media width? on page 3.
to make copies…
1. Place the document face down with the intended top edge
forward in the scanner insertion slot. You can load your
original into the scanner from the scanner’s center or right-
hand side (whichever is set in Setup > Scan Options > Load).
2. Slide the document gently into the insertion slot until you feel it
pulled into the start position.
3. In the Copy tab, select Color or
B&W (black and white)
copying—this determines the
Type of original.
4. Select your Type of original
template.
5. Set the Input size.
Usually this will be equal to the
size of your original. You can let
the scanner detect the
document’s size.
6. Set the intended Output size of
your copy.
For making one-to-one copies,
this will be the size of your
original.
You can also use Scale to determine the copy’s size.
7. Press the Copy button.