Hard disk drive (end user replaceable) – HP 2000 User Manual
Page 69
67
Hard Disk Drive
(End User Replaceable)
Whereas all the hard disk drives are compatible between the OmniBook 2000, 5500, and 5700,
the table below indicates which hard drives were originally shipped with each corresponding
OmniBook.
Table 17 - Hard Drive Availability Matrix
Hard Drive
Part Number
Exchange p/n
OB2000
OB5500
OB5700
Hard Drive
Plastic Kit Part #
810-MB
F1191-60901
F1191-69001
ü
F1320-60947
1.35-GB
F1192-60901
F1192-69001
ü
F1320-60947
2.1-GB
F1339-60901
F1339-69001
ь
ь
F1350-60920
3.1-GB
F1348-60901
F1348-69001
ü
F1350-60920
1.44-GB
F1375-60901
F1375-69001
ü
F1350-60920
Required Equipment
•
Small phillips screwdriver
Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Remove the screw and Security Cover located at the back end of the hard disk drive. See
Figure 21.
4. Firmly slide the drive out of the compartment. This will take some force.
5. If the new hard drive does not have a plastic case, the old plastic case can be removed from
the old hard drive by removing the four screws on the bottom of the case. Depending on the
manufacturer of the replacement hard drive, the screw hole placement may vary. The
Figure 21 - Removing the Hard Disk Drive
Hard Drive Screw
F1320-60919
Hard Drive Security
Cover
F1320-40001