Hitachi UC 18YFL - Manual (Page 9)

English
9
3. Charging
⅜ When the battery is connected to the battery charger, charging will commence and the
pilot lamp will light in red. (See Table 2)
NOTE: If the pilot lamp flickers in red, pull out the plug from the receptacle and check
if the battery is properly mounted.
⅜ When the battery is fully charged, the pilot lamp will bilink in red slowly. (At 1-second
intervals) (See Table 2)
1. Insert the plug of battery charger into the receptacle.
When the plug of battery charger has been inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
WARNING:
Do not use the electrical cord if damaged. Have
it repaired immediately.
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as shown in Fig. 2. Make sure it contacts the
bottom of the battery charger.
EB1412S
EB1414S
EB1414
EB14B
EB1424
EB1426H
EB1430H
EB1430X
EB1433X EB1212S
EB1214S
EB1214L
EB1220BL
EB1224
EB1230HL
EB1230X
EB1233X
EB12S
FEB12S
EB12B
EB1226H
EB1230H
BCL1430
EB912S
EB9S
EB914S
EB914
FEB9S
EB9B
EB924
EB926H
EB930H
EB933X
Fig. 2
EB712S
EB7S
EB714S
FEB7S
EB7B
EB1812S
EB18B
EB1820
EB1830H
EB1814SL
EB1820L
EB1824L
EB1826HL
EB1830HL
EB1830X
EB1833X
EBM1830