Henny Penny FS-100 - Manual

FS-100/200
OPERATING INSTRUCTIONS
1. Position shuttle in front of fryer. Be sure shuttle is
completely empty before using. Figure 1.
When using Shortening Shuttle TM, , touch
handles only. Wear protective gloves.
Shuttle body can get very hot in use.
TO AVOID PERSONAL INJURY, BURNS,
SPILLS, AND CORROSION:
1) DO NOT FILL SHUTTLE WITH MORE
THAN ONE FRYPOT OF
SHORTENING.
2) NEVER PUT WATER AND/OR
CLEANER IN THE SHORTENING
SHUTTLE
TM
To avoid personal injury, burns, spills, and
corrosion, the Shortening Shuttle
TM must
be hand-held or laid flat on floor, when it
contains hot shortening. Do not lean it,
rest it, stand it up, or prop it, in any other
position other than FLAT ON floor or
resting, as intended, over grease dumpster.
2. Disconnect the faucet from the fryer. Figure 2.
3. Disconnect hose from shuttle and connect hose
to fryer. Figure 3.
Figure 1
Figure 2
Figure 3
3