Husqvarna 326ES - Manual (Page 2)

KEY T O SYMBOLS
2 – English 1151020-95 Re v . 2 2008-03-10
Symbols
W ARNING! Edgers can be
dangerous! Careless or incorrect
use can result in serious or fatal
injury to the operator or others. It is
extremely important that you read
and understand the contents of the
operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• A protective helmet where there
is a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with
applicable CE directives.
Watch out for thrown objects and
ricochets.
Warning for rotating blade. Keep
hands and feet clear.
Warning! The blade continues to
rotate even after the engine has
stopped. When the engine has
stopped, stop the blade from rotating
by letting the blade come in contact
with the ground.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 metres.
Arrows which show limits for handle
positioning.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
The engine is s witched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
50FT
15 m
50FT
15 m