HP 500B - Manual (Page 65)

Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table A-4 Computer Setup—Boot
Option Description
Boot-time Diagnostic
Screen Disables/enables POST diagnostic messages display.
ESC: Boot Menu Enables/disables the ability to press the Esc key to access the boot menu during boot.
F9: Diagnostics Enables/disables the ability to press the F9 key to access the Diagnostics menu during boo.
F10: Setup Enables/disables the ability to press the F10 key to access the Setup menu during boo.
F11: Recovery Enables/disables the ability to press the F11 key to access the recovery menu during boo.
F12: Boot from LAN Enables/disables the ability to press the F12 key to boot from LAN.
Boot Device Priority Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
● 1st Boot Device
● 2nd Boot Device
● 3rd Boot Device
● 4th Boot Device
Options for each boot device include:
● CD-ROM Group
● Hard Drive Group
● Floppy Group
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
CD-ROM Group Boot
Priority Specifies boot device priority within CD/DVD drives.
Hard Drive Group
Boot Priority Specifies boot device priority within hard drives.
Floppy Group Boot
Priority Specifies boot device priority within removable devices.
Network Group Boot
Priority Specifies boot device priority within bootable network devices.
Model 500B/510B — Computer Setup (F10) Utilities 57