Harbor Freight Tools 41711 - Manual (Page 2)

SpECIFICATIONS MODEL # 41711 TILE CUTTER
FEATURES OF THIS TOOL
Sturdy cast aluminum and steel construction will deliver a long service life. 1.
Large capacity straight cuts up to 17” long and circles up to 3-1/4”. 2.
Convenient built-in breaker. 3.
Handy circle cutter will cut circles as small as 1-3/16” and as large as 3-1/4”. 4.
Built in measurement scales for tile width, cut angle, and circle cut dimension. 5.
SAVE THIS MANUAL
You will need this manual for the safety warnings and cautions, assembly instructions, operating procedures,
maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry
place for future reference.
Page 2 SKU # 41711
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
Base Material Steel Place, 13 ga.
Base Size 7-3/4”W x 27-1/2”L
Guide Support Cast Aluminum
Guide Bars 3/4” Steel Tube
Guide Bar Length 25-1/2”
Cutter Fixture Cast Aluminum (3 pcs.)
Straight Cutter Wheel Hardened Steel
Straight Capacity 15-3/4”
Cutter Handle 1/2” Steel Tube x 12”L
Circle Cutter Cast Aluminum
Circle Dimension 1-3/16” Min., 3-1/4” Max.
Cutting Tip Carbide
Miter and Fence Cast Aluminum
Adjustment 0° to 45° (5° increments)
New Weight 11.4 Lbs.
REV 10c