Hitachi DVRF7U - Manual (Page 68)

68 - English
R
ecording
Press the POWER button.
• The DVD Recorder-VCR will turn off.
• When the reserved program begins, recording will
start simultaneously.
• “SA” and “ ” will appear in the display of DVD
Recorder-VCR.
• If the signal from the connected device is
interrupted, recording will stop and the DVD
Recorder-VCR will automatically turn off.
■ Sometimes, when the DVD Recorder-VCR senses
that the reserved program has begun and starts
recording, the beginning of program may not be
recorded.
■ Satellite link recording is not possible using the S
VIDEO IN, LINE 2 (L2) or DV IN jack.
■ Choose “Off” in step 4 above to release satellite
link recording.
■ Satellite link recording will not work during timer
recording: If signals are input to the LINE IN 1
jacks when timer recording has finished, the DVD
Recorder-VCR will turn off, and then satellite link
recording will start.
■ Even if timer preset time is reached during satellite
link recording, satellite link recording will have pri-
ority.
■ If satellite link recording has been set, the fan will
still rotate after the DVD Recorder-VCR turns off.
Note
5
Connect a device on which reservation standby is possible,
such as a CS tuner, to the LINE IN 1 jacks on the back of
this DVD Recorder-VCR: You can then start recording,
interlocking with the beginning of the broadcast program.
Set the connected device to reservation standby in advance.
Press the MAIN MENU button.
Use the 34 buttons to choose “Timer Rec.”, and
then press the ENTER button.
Use the 34 buttons to choose “SA Programming”,
and then press the ENTER button.
Use the 34 buttons to choose “VCR” or “DVD”,
and then press the ENTER button.
• The reserved program will be recorded on the
selected device.
4
3
2
1
Satellite Link Recording
RETURN SELECT MOVE EXIT
Timer Record DVD-RAM(VR)
VCR Plus+ Record
Timer Record
Scheduled Record List
Disc
Navigation
Playlist
Timer Rec.
Dubbing
Setup
Disc Manager
: Off SA Programming