Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P - Manual

1
C-TSM-CV-P_INST_4-08
INSTALL INSTRUCTIONS
C-TSM-CV-D and C-TSM-CV-P
1996-2008 CROWN VICTORIA
DRIVER and PASSENGER - TRUNK SIDE MOUNTS
• Drill with 1/8” and 3/16” drill bits
• Open End Wrench - 3/8”
• Phillips Screwdriver
TOOLS REQUIRED:
QTY: DESCRIPTION: PART #:
3 10/32 X 1/2” Machine Screw GSM33118
3 10/32 Keps Nut GSM30028
3 #10 x 3/4” Sheet Metal Screw GSM33195
HARDWARE:
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email [email protected] or call 1-800-524-9900.
LINE DRAWING:
h 0.
Passenger Side shown
# C-TSM-CV-P