HONDA 08A50-ED1101 - Manual (Page 2)

 2000 American Honda Motor Co., Inc. – All Rights Reserved 2 of 2 AII 21962 (0007)
5. Remove and retain the four screws securing the
audio unit. Unplug the 16-pin connector and the
antenna lead, and remove the audio unit.
ANTENNA LEAD
16-PIN
CONNECTOR
AUDIO UNIT
Retain these screws.
6. Remove and discard the brackets, screws, and
the pocket from the audio unit. Retain the four
audio unit bracket screws.
BRACKETS
(Discard.)
POCKET
(Discard.)
Discard.
Discard.
Retain.
Retain.
AUDIO
UNIT
7. Remove and discard the shipping screws and
wrapper from the CD changer.
WRAPPER
(Discard.)
SHIPPING SCREWS
(Discard.)
8. Place the audio unit on top of the CD changer.
Using the mounting brackets (sold separately),
attach the right and left brackets to the audio unit
and the
CD changer using the four screws
supplied with the mounting brackets, and the four
screws removed in step 6. Tighten the screws
securely.
LEFT BRACKET
RIGHT
BRACKET
CD CHANGER
9. Plug the 12-pin connector from the CD changer
into the back of the audio unit.
ANTENNA LEAD
16-PIN
CONNECTOR
12-PIN CONNECTOR
FROM CD CHANGER
AUDIO UNIT
10. Plug the 16-pin connector and the antenna lead
into the audio unit, then reinstall the audio unit
assembly.
11. Reinstall the lower cluster assembly.
12. Reconnect the negative cable to the battery.
13. Check that the CD changer operates according to
the owner’s manual supplied with the CD
changer.
14. Reset the clock and the radio station presets.
15. Put the CD changer owner’s manual in the glove
box for your customer.