Hitachi ULTRASTAR 15K450 HUS154530VLF400 User Manual
Hitachi Hardware
Advertising
Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
Hard Disk Drive Specification
Ultrastar 15K450
3.5 inch 4Gb FC-AL Hard Disk Drive
Models:
HUS154545VLF400
HUS154530VLF400
Version 1.2
29 October 2008
Warning: Printed copies of this document are considered current only on the date of print. Replacement and disposal
of down-level versions is the responsibility of the document holder.
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1.0 General
- 2.0 Outline of the Drive
- 3.0 Fixed-disk Subsystem Description
- 4.0 Drive Characteristics
- 5.0 Data Integrity
- 6.0 Physical Format
- 7.0 Electrical Interface
- 8.0 Environment
- 9.0 DC Power Requirements
- 10.0 Reliability
- 11.0 Mechanical Specifications
- 12.0 Vibration and Shock
- 13.0 Acoustics
- 14.0 Identification
- 15.0 Electromagnetic Compatibility
- 16.0 Standards
- 17.0 FC-AL attachment
- 17.1 Fundamentals
- 17.2 Basic Link Services
- 17.3 Extended Link Services
- 17.3.1 Link Service Accept (LS_ACC)
- 17.3.2 Link Service Reject (LS_RJT)
- 17.3.3 Port Login (PLOGI)
- 17.3.4 Logout (LOGO)
- 17.3.5 Fabric Login (FLOGI)
- 17.3.6 Fabric Address Notification (FAN)
- 17.3.7 Port Discovery (PDISC)
- 17.3.8 Address Discovery (ADISC)
- 17.3.9 Process Login (PRLI)
- 17.3.10 Process Logout (PRLO)
- 17.3.11 Read Link Error Status Block (RLS)
- 17.3.12 Report Node Capabilities (RNC)
- 17.3.13 Re-instate Recovery Qualifiers (RRQ)
- 17.3.14 Third Party Process Logout (TPRLO)
- 17.3.15 Request Node Identification Data (RNID)
- 17.3.16 Report Port Speed Capabilities (RPSC)
- 17.4 Common Fibre Channel Services
- 17.5 FC-AL timers
- 17.6 Invalid frame delimiter
- 18.0 SCSI-FCP
- 19.0 SCSI Command Set
- 19.1 SCSI Control Byte
- 19.2 Abbreviations
- 19.3 Byte ordering conventions
- 19.4 FORMAT UNIT (04)
- 19.5 INQUIRY (12)
- 19.6 LOG SELECT (4C)
- 19.7 LOG SENSE (4D)
- 19.7.1 Log Page parameters
- 19.7.2 Log Sense Page 0
- 19.7.3 Log Sense Page 2
- 19.7.4 Log Sense Page 3
- 19.7.5 Log Sense Page 5
- 19.7.6 Log Sense Page 6
- 19.7.7 Log Sense Page D
- 19.7.8 Log Sense Page E
- 19.7.9 Log Sense Page F
- 19.7.10 Log Sense Page 10
- 19.7.11 Log Sense Page 15
- 19.7.12 Log Sense Page 2F
- 19.7.13 Log Sense Page 30
- 19.7.14 Log Sense Page 37
- 19.8 MODE SELECT (15)
- 19.9 MODE SELECT (55)
- 19.10 MODE SENSE (1A)
- 19.10.1 Mode Parameter List
- 19.10.2 Mode Page 00 (Vendor Unique Parameters)
- 19.10.3 Mode Page 01 (Read/Write Error Recovery Parameters)
- 19.10.4 Mode Page 02 (Disconnect/Reconnect Parameters)
- 19.10.5 Mode Page 03 (Format Device Parameters)
- 19.10.6 Mode Page 04 (Rigid Disk Drive Geometry Parameters)
- 19.10.7 Mode Page 07 (Verify Error Recovery Parameters)
- 19.10.8 Mode Page 08 (Caching Parameters)
- 19.10.9 Mode Page 0A (Control Mode Page Parameters)
- 19.10.10 Control Extension Subpage
- 19.10.11 Mode Page 0C (Notch Parameters)
- 19.10.12 Mode Page 19h (Fibre Channel Port Control Page)
- 19.10.13 Mode Page 1A (Power Control)
- 19.10.14 Mode Page 1C (Informational Exceptions Control)
- 19.11 MODE SENSE (5A)
- 19.12 PERSISTENT RESERVE IN (5E)
- 19.13 PERSISTENT RESERVE OUT (5F)
- 19.14 PRE-FETCH (34)
- 19.15 READ (6) - (08)
- 19.16 READ (10) - (28)
- 19.17 READ (12) - (A8)
- 19.18 READ (16) - (88)
- 19.19 READ (32) - (7F/09)
- 19.20 READ BUFFER (3C)
- 19.21 READ CAPACITY (10) - (25)
- 19.22 READ CAPACITY (16) (9E/10)
- 19.23 READ DEFECT DATA (37)
- 19.24 READ DEFECT DATA (B7)
- 19.25 READ LONG (3E)
- 19.26 REASSIGN BLOCKS (07)
- 19.27 RECEIVE DIAGNOSTICS RESULTS (1C)
- 19.28 RELEASE (17)
- 19.29 RELEASE (57)
- 19.30 REPORT DEVICE IDENTIFIER (A3/05)
- 19.31 REPORT LUNS (A0)
- 19.32 REPORT SUPPORTED OPERATION CODES (A3/0C)
- 19.33 REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS (A3/0D)
- 19.34 REQUEST SENSE (03)
- 19.35 RESERVE (16)
- 19.36 RESERVE (56)
- 19.37 REZERO UNIT (01)
- 19.38 SEEK (6) - (0B)
- 19.39 SEEK (10) - (2B)
- 19.40 SEND DIAGNOSTIC (1D)
- 19.41 SET DEVICE IDENTIFIER (A4/06)
- 19.42 START STOP UNIT (1B)
- 19.43 SYNCHRONIZE CACHE (10) - (35)
- 19.44 SYNCHRONIZE CACHE (16) - (91)
- 19.45 TEST UNIT READY (00)
- 19.46 VERIFY (2F)
- 19.47 VERIFY (12) - (AF)
- 19.48 VERIFY (16) - (8F)
- 19.49 VERIFY (32) - (7F/0A)
- 19.50 WRITE (6) - (0A)
- 19.51 WRITE (10) - (2A)
- 19.52 WRITE (12) - (AA)
- 19.53 WRITE (16) - (8A)
- 19.54 WRITE (32) - (7F/0B)
- 19.55 WRITE AND VERIFY (10) - (2E)
- 19.56 WRITE AND VERIFY (12) - (AE)
- 19.57 WRITE AND VERIFY (16) - (8E)
- 19.58 WRITE AND VERIFY (32) - (7F/0C)
- 19.59 WRITE BUFFER (3B)
- 19.59.1 Combined Header And Data (Mode 00000b)
- 19.59.2 Write Data (Mode 00010b)
- 19.59.3 Download Microcode (Mode 00100b)
- 19.59.4 Download Microcode and Save (Mode 00101b) -Single Binary File
- 19.59.5 Download Microcode and Save (Mode 00111b) - Multiple Binary Files
- 19.59.6 Write Data to Echo Buffer (Mode 01010b)
- 19.59.7 Enable Expander Communications Protocol (Mode 11010b)
- 19.60 WRITE LONG (3F)
- 19.61 WRITE SAME (41)
- 19.62 WRITE SAME (16) - (93)
- 19.63 WRITE SAME (32) - (7F/0D)
- 20.0 SCSI Status Byte
- 21.0 Additional information
- 21.1 Obtaining an AL_PA
- 21.2 Loop Initialization Procedure
- 21.3 Flow Control
- 21.4 Login Requirements
- 21.5 Public Loop Operation
- 21.6 SCSI Protocol
- 21.6.1 Priority of SCSI Status Byte Reporting
- 21.6.2 Invalid LUN Processing
- 21.6.3 Overlapped Commands
- 21.6.4 Command Processing During Execution of Active I/O Process
- 21.6.5 Unit Attention Condition
- 21.6.6 Command Processing During Startup and Format Operations
- 21.6.7 Internal Error Condition
- 21.6.8 Deferred Error Condition
- 21.6.9 Degraded Mode
- 21.6.10 Command Processing while Reserved
- 21.7 Priority Commands
- 21.8 Command Queuing
- 21.9 Command Reordering
- 21.10 Concurrent I/O Process
- 21.11 Write Cache
- 21.12 Automatic Rewrite/Reallocate
- 21.13 Segmented Caching
- 21.14 Multiple Initiator Systems
- 21.15 Enclosure Services
- 21.16 Multiple Initiator Environment
- 21.17 Reset
- 21.18 Diagnostics
- 21.19 Idle Time Function
- 21.20 Command Time out Limits
- 21.21 Recommended Initiator ERP
- 22.0 SCSI Sense Data
- 22.1 SCSI Sense Data Format
- 22.2 Sense Data Description
- 22.2.1 Valid (Bit 7 of byte 0)
- 22.2.2 Error Code (Bit 6 - 0 of byte 0)
- 22.2.3 ILI: Incorrect Length Indicator (Bit 5 of byte 2)
- 22.2.4 Sense Key (Bit 3 - 0 of byte 2)
- 22.2.5 Information Bytes (Byte 3 through 6)
- 22.2.6 Additional Sense Length (Byte 7)
- 22.2.7 Command Specific Information (Byte 8 through 11)
- 22.2.8 Additional Sense Code/Qualifier (Byte 12 and 13)
- 22.2.9 RU: Field Replaceable Unit (Byte 14)
- 22.2.10 Sense Key Specific (Byte 15 through 17)
- 22.2.11 Reserved (Byte 18 through 19)
- 22.2.12 Vendor unique error information (Byte 20 through 23)
- 22.2.13 Physical Error Record (Byte 24 thru 29)
- 22.2.14 Reserved (Byte 30 through 31)
- 23.0 Appendix. UEC list